Can i cut lighting track

She has a degree in journalism from the University of Georgia and began writing professionally in By Kimberly Johnson Updated July 18, The Drip Cap Track lighting consists of a long, thin piece of plastic that is installed on the ceiling to which movable spotlights are attached. A lighting retrofit is simply an upgrade to your light fixtures or lamps, increasing energy efficiency. Energy savings often offset the cost of these projects over time, while improving light levels and eliminating maintenance headaches.

Utility companies often offer rebates for this kind of project. Skip to content Helpful tips. May 3, Joe Ford. Remove the track head that's not working. Use fine-grit sandpaper to clean the section of metal track where the head was installed.

How far from Wall should track lighting be? Mount the track fixture parallel to the wall. If your ceiling height is 9 feet or lower, place the track about two to three feet from the wall. If the ceiling is between 9 and 11 feet, place the track about three to four feet from the wall.

Then, space the fixtures the same distance apart as the track is from the wall. How do you connect power to track lighting? Can you put track lighting on the wall?

Because it is surface mounted, track is particularly easy to install, especially in remodels. The track is usually mounted to the ceiling but it can be mounted to a wall, a beam or dropped from the ceiling on stems or cables. Does track lighting need a junction box? Hardwired track lights require electrical connections be made at a junction box an electrical box in the ceiling or wall during installation.

If no junction box is available along the proposed path of the lighting track, you will need to install one or have it installed by a qualified electrician. How do I change track lighting heads? Can I cut the tracks used in track lighting? Here is the link to the track I would be buying. My home depot offers a 24" light rail. Dingo , Oct 21, I agree with Dingo, checking into a shorter one and HD sounds like a good idea. I believe both of those companies are in WV.